Polyurethane Solid Rod (31mm OD)

REVIEWS rate_review

Polyurethane Solid Rod (31mm OD)

We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!

INSTALLATION book

Polyurethane Solid Rod (31mm OD)

Installation Guide: Download Now

Installation Time (hours): 0

Difficulty: DIY - Do it yourself

LUBRICATION opacity

Polyurethane Solid Rod (31mm OD)

Lubrication Guide

In the majority of applications the Whiteline bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Whiteline products take the following precautions when installing:

Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.

Please use these hints along with any instructions provided when fitting Whiteline products. Vehicle manufacturers manual should be used to ensure Whiteline warranty compliance.

Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturers tolerances.

Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.

NOTE:

The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.