Control Arms with Fitting Position Front and Rear, Front, Rear for 1998 Honda Civic EX-R

A control arm is the hinged link between the chassis and the hub carrying each wheel on your Honda Civic. It pivots on bushings at the chassis end, connects to the hub through a ball joint at the other, and its job is to let the wheel travel up and down while holding it exactly where the alignment says it should be.

Because the arm is a lever, whatever movement it allows gets multiplied by the time it reaches the tire. Nothing else under the car has as much say in where your wheels are pointed.

A Lever With Your Honda Civic Alignment on the End

Springs carry the weight and dampers control the motion. The control arm decides the geometry.

Every time you brake, the wheel is being pushed rearward. Every time you corner, it is loaded sideways. The arm resists both while still swinging freely through its travel, and it does that through two very different joints. The bushings at the inboard end allow rotation on one axis while resisting movement on the others, and the ball joint at the outboard end allows the hub to pivot in every direction so the wheel can steer and articulate at the same time.

A small amount of play at either end becomes a much larger amount of movement at the contact patch, which is why a tired control arm shows up as vague steering and uneven tire wear long before anything looks obviously broken.

Your Honda Civic Front End Decides How Many Arms You Have

Which arms your Honda Civic has depends on the front end design.

A strut suspension typically uses a single lower control arm per side, with the strut locating the top of the hub, so the front lower control arm does all the work of positioning the wheel and carries the lower ball joint. A double wishbone layout uses upper and lower control arms together, which gives finer control over how camber changes through travel and is why it shows up on performance cars, trucks and solid front axle designs.

You will hear the same part called a wishbone or an A-arm depending on its shape. Same thing.

At the rear, control arms turn up as lateral arms, camber arms, toe arms and trailing arms depending on what each one is holding. Rear control arm positions are where most of the adjustment lives on a modern independent rear end.

When Your Honda Civic Ball Joint Means Buying the Whole Arm

The ball joint usually fails first, and how it is attached decides what you end up buying.

Where the joint is pressed or riveted into the arm, it is not separately serviceable in any practical sense, so a worn joint means a new arm. That sounds expensive until you consider the arm arrives assembled with fresh bushings and a new joint, which turns a press job into a bolt-in.

Where the vehicle uses a bolt-in joint you can replace it on its own and keep the arm, which is why arms are offered both with and without joints. Ball joint boot kits cover the case where the joint is still sound but the rubber has split, and that is worth acting on quickly because once grit and water reach the socket the joint is on borrowed time.

A lower ball joint is usually the loaded joint, carrying vehicle weight while the hub steers, so it works harder than the upper ball joint and tends to go first. A ball joint with real play is a safety item rather than a comfort one, since it is what holds the hub to the car.

Adjustment the Factory Never Gave Your Honda Civic

This is where the range goes past replacement.

Adjustable control arms let the length be set, which hands the aligner range the car never had. Adjustable camber arms bring a lowered car back into specification and let you run more negative camber deliberately if that is what the setup wants. Adjustable upper control arms recover camber and caster on a raised truck where the factory adjustment has been used up, and fixed offset upper control arms do the same without the setup. Adjustable rear lateral and toe arms do the same for the back end.

Because each side adjusts independently, they also fix problems a symmetrical correction cannot, like a car that has settled unevenly or pulls with tires and pressures ruled out.

Fixed offset arms are the alternative. The correction is built into the shape of the arm, so it is right the moment it is bolted in and nothing can move or work loose. On a truck at a known lift height that reliability is often worth more than adjustability.

Why a Lowered Honda Civic Can Lean More Than a Stock One

Worth understanding if your car is lowered, because it explains a problem most people never diagnose.

Lowering a strut car does not just change camber and toe. It changes the angle of the lower control arm, which moves the roll center, and on a lot of front drive platforms the roll center drops faster than the center of gravity does. The gap between them grows, and a bigger gap means more leverage working to roll the body over.

The result is a lowered car that leans more than it did at stock height, despite the lower center of gravity and stiffer springs. Owners usually blame the springs or add more sway bar, which treats the symptom.

Roll center and bump steer correction kits address the geometry itself, repositioning the ball joint to restore the arm angle the car was designed around. On a seriously lowered front drive car, that is one of the most significant handling changes available.

What a Worn Honda Civic Control Arm Sounds Like, and What It Feels Like

• A dull clunk or thud from the front over bumps, driveways and speed bumps
• Clunking that shows up when the wheel is turned and loaded, which points at the ball joint
• Steering that feels vague, wanders, or needs constant correction
• The car pulling to one side under braking
• Shudder or vibration through the wheel when braking from speed
• Uneven tire wear, most commonly on the inside edge
• An alignment that will not hold spec between services
• Visible cracking, splitting or separation in the bushings, or a torn ball joint boot
• Grease thrown around the inside of the wheel, which means a boot has failed

A bent arm is worth checking for specifically if the car has hit something hard and the alignment has never been right since. A few millimeters of deflection looks like nothing and changes where the wheel sits entirely.

Why Two Honda Civic Quotes for the Same Job Differ by Hundreds

Labor is what drives control arm replacement cost, not parts, and understanding that helps you spend less.

An arm has to come off the car whichever route you take, so the teardown is identical whether you are pressing in bushings, changing a ball joint or fitting a complete assembly. That is why doing everything on an arm at once makes sense, and why replacing bushings during any other suspension work costs almost nothing extra.

An alignment afterward is not optional, since removing play changes camber and toe immediately, so build it into whatever you are budgeting.

When you are comparing shop quotes, the numbers that matter are how many arms are being done, whether complete arms or component repairs are being quoted, and whether the alignment is included. Those three explain almost all of the difference between one quote and another.

Separators, Torque at Ride Height, and the Alignment After on Your Honda Civic

A complete arm bolts into the factory mounting locations and arrives assembled, which is the main reason to buy the arm rather than the pieces.

Support the car properly and take the load off the suspension before separating a ball joint, because a joint under spring load releases suddenly. Use a proper separator rather than a hammer, which damages the knuckle bore and the stud threads.

Torque the inner fasteners to specification with the car on its wheels at ride height, not hanging at full droop. A bushing clamped at droop sits preloaded in a position the suspension never returns to, so it binds and wears out early. This is the most common mistake made on control arm work.

Do both sides where the wear is age related, since a new arm working against a tired one leaves the front end behaving differently left to right.

On adjustable arms, set them roughly beforehand and let the aligner make the final call with the machine reading the numbers. Finish with an alignment either way.

Find Control Arms for Your Honda Civic

Most of the lineup comes as control arm kits, split into upper and lower positions, with ball joints available on their own.

Select your Honda Civic to see the control arms, camber arms, ball joints and correction kits available for it, and check each listing for the side and position it suits along with how much adjustment it offers. Every Whiteline component is backed by our warranty, a fitment guarantee and 60 day returns.