What makes Whiteline different from OEM suspension components?

Whiteline suspension products are engineered for performance and durability well beyond OEM standards. While factory (OEM) components often use soft rubber bushings that degrade over time and under load, Whiteline uses advanced polyurethane and bushing technology that resists oil, heat, abrasion, and weathering. This results in sharper handling, more responsive steering, better load control, and significantly improved lifespan — without the harshness of traditional solid bushings.

Do I need a wheel alignment after installing Whiteline components?

It’s recommended to perform a wheel alignment after installation to ensure optimal performance and tire wear.

Are Whiteline Fixed Offset Upper Control Arms (UCAs) necessary for lifted vehicles?

They help maintain correct alignment and steering geometry after a vehicle is lifted.

Can I install Whiteline products myself?

Some products are DIY-friendly, but professional installation is recommended for suspension components.

Do Whiteline products come with a warranty?

Yes. Please refer to our warranty policy for details.

Suspension Arms | Shop Online

Front Upper Control Arms Fixed Offset to Suit Toyota Land Cruiser 200 Series

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA246 Benefit Note:
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Front Upper Control Arms Fixed Offset to Suit Toyota Land Cruiser 200 Series

ℹ️ Fixed offset alignment correction arms - includes ball joint

Maximises tyre contact with the road, improving cornering and grip; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£647.99
Front Lower Control Arm - Arm to Suit Audi, Seat, Skoda and Volkswagen PQ35 Fwd/Awd

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA253 Benefit Note:
These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with +0.5deg caster and anti-lift improvements into these arms to optimise wheel alignments settings for street and track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. The change in lift and dive geometry enables the suspension to work more freely. Whiteline's rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high light alloy housing boasting anti geometry characteristics permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision most noticeably reduced 'toe-change' during hard cornering, creating impressive turn-in ability! The more positive location of the arm through the range of suspension movement and gains in alignment geometry ensures the car feels more responsive and engaging at turn-in, mid corner and corner exit.
Front Lower Control Arm - Arm to Suit Audi, Seat, Skoda and Volkswagen PQ35 Fwd/Awd

ℹ️ Performance alloy - suits models to - 08/2010 - adds +0.5deg caster correction

Ensures long-lasting durability, matter matter the purpose; the perfect, complete upgrade. Includes: 2 Arms, 2 Housings

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms, 2 Housings
£543.26
Front Control and Strut Tension - Arm Assembly to Suit BMW 1, 3 Series and X1

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA255 Benefit Note:
Whiteline KTA255 for the BMW 1 Series, 3 Series, X1 and Z4 is a set of 4 arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber front control arm and radius arm bushings tend to take a beating, and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting. For ease of fitment these alloy arms also come complete with adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg camber and separately caster. These two key alignment angles can help ensure you get the car set up for minimal tyre wear with maximum grip. The bushings are designed with internal knurling to ensure a reservoir for long-term lubrication with the supplied, extreme pressure molybdenum disulphide (LM) based grease for extended life. High strength ball joints are included with the arms to make this a fit and forget purchase compared to the short service life of the original and cheaper aftermarket alternatives.
Front Control and Strut Tension - Arm Assembly to Suit BMW 1, 3 Series and X1

ℹ️ Performance - fixed +/-0.5deg camber and caster correction

Ensures long-lasting durability, matter matter the purpose; the perfect, complete upgrade. Includes: 4 Arms, 4 Bolts, 8 Nuts

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 4 Arms, 4 Bolts, 8 Nuts
£464.06
Front Lower Control Arm - Arm to Suit Subaru Liberty and Outback BM, BR

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: WA462R Benefit Note:
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints.

Front Lower Control Arm - Arm to Suit Subaru Liberty and Outback BM, BR

ℹ️ Replacement and repair upgrade - includes ball joint

Ensures long-lasting durability, matter matter the purpose; the perfect, complete upgrade. Includes: 1 Arm

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 1 Arm
£237.25
Front Lower Control Arm - Arm Assembly to Suit Honda Civic 10th Gen FC, FK

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA288 Benefit Note:
These Whiteline front lower control arms feature significant geometry gains with -1.0deg camber and +0.75deg caster improvements into these arms to optimise wheel alignments settings for track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. Whiteline's rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced 'toe-change' during hard cornering, creating impressive turn-in ability! The more positive location of the arm through the range of suspension movement and gains in alignment geometry ensures the car feels more responsive and engaging at turn-in, mid corner and corner exit.

Front Lower Control Arm - Arm Assembly to Suit Honda Civic 10th Gen FC, FK

ℹ️ Performance - suits models with M14 ball joint pin - adjustable +1.0 deg camber, +0.75deg caster + anti-lift correction

Maximises tyre contact with the road, improving cornering and grip; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£590.26
Front Lower Control Arm - Arm Assembly to Suit Subaru Forester SH and Exiga YA

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA360 Benefit Note:
Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Front Lower Control Arm - Arm Assembly to Suit Subaru Forester SH and Exiga YA

ℹ️ Performance - increased caster correction

Delivers a balanced mix of comfort, precision, and durability; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£388.57
Front Control and Strut Tension - Arm Assembly to Suit BMW 2, 3 and 4 Series

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA383 Benefit Note:
Whiteline KTA383 for the BMW F22 2-Series and F3X 3/4-Series is a set of 4 complete arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber tension strut arm bushings tend to take a beating and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting.

For ease of fitment these new alloy tension arms also come complete with sealed ball joint ends and adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg caster adjustment for improved straight-line stability, enhanced steering feel, and stronger front-end grip on corner entry.

The F8X M car upgraded front control arms feature sealed inner bearings to provide superior precision, durability, and reduced deflection under load. They add a fixed 0.5 deg negative camber by pushing the bottom of the wheel outward and weight slightly less than the stock F22/F3X control arms. This is the perfect upgrade for track and autocross cars that demand more negative front camber.

Front Control and Strut Tension - Arm Assembly to Suit BMW 2, 3 and 4 Series

ℹ️ Performance - fixed -0.5deg camber and +0.5deg caster on-car adjustable correction - excludes xDrive models - includes ball joint

Delivers a balanced mix of comfort, precision, and durability; the perfect, complete upgrade. Includes: 4 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 4 Arms
£852.20
Performance Front Lower Control Arms Caster Correction to Suit Honda Accord and Euro CP, CU, CW

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA365 Benefit Note:
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
Performance Front Lower Control Arms Caster Correction to Suit Honda Accord and Euro CP, CU, CW

ℹ️ Performance - increased caster correction

Maximises tyre contact with the road, improving cornering and grip; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£442.91
Front Lower Control Arm - Arm Assembly Performance Caster Correction to Suit Honda Civic 9th Gen FG, FB

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA367 Benefit Note:
Complete replacement control arms feature increased static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Front Lower Control Arm - Arm Assembly Performance Caster Correction to Suit Honda Civic 9th Gen FG, FB

ℹ️ Performance - excludes Si models - adds +0.75deg caster

Ensures long-lasting durability, matter matter the purpose; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£278.93
Front Lower Control Arm - Arm Assembly Performance Caster Correction to Suit Honda Accord and Euro CL, CM

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA371 Benefit Note:
Complete replacement control arms feature increased static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Front Lower Control Arm - Arm Assembly Performance Caster Correction to Suit Honda Accord and Euro CL, CM

ℹ️ Performance - increased caster correction

Maximises tyre contact with the road, improving cornering and grip; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£393.52
Front Lower Control Arm - Arm Assembly-Caster Correction to Suit Ford Fiesta WS-WZ and Mazda 2 DE

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA362 Benefit Note:
Complete replacement control arms featuring double offset bushings that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Front Lower Control Arm - Arm Assembly-Caster Correction to Suit Ford Fiesta WS-WZ and Mazda 2 DE

ℹ️ Performance - adds +0.5deg caster correction - includes ball joint

Greatly increases control and confidence; the perfect, complete upgrade. Includes: 1 Arm

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£250.62
Front Lower Control Arm - Arm to Suit Audi, Seat, Skoda and Volkswagen MQB Fwd/Awd

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA386 Benefit Note:
Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Front Lower Control Arm - Arm to Suit Audi, Seat, Skoda and Volkswagen MQB Fwd/Awd

ℹ️ Performance - adds +/- 0.5deg camber and caster

Greatly increases control and confidence; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£487.73
Roll Centre - Correction Service Kit for Whiteline KCA472

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KSK134 Benefit Note:
Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Roll Centre - Correction Service Kit for Whiteline KCA472

ℹ️ Service kit - replacement ball joint boot - suits Roll Centre Correction Kit

Maximises grip and stability for better control; the perfect, complete upgrade. Includes: 2 Boots

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Boots
£25.26
Front Lower Control Arm - Arm to Suit Subaru Impreza GD WRX STi

Pre-Order
Available for Preorder. Ships within 4-6 weeks.
Available for Preorder. Ships within 4-6 weeks.

SKU: KTA289 Benefit Note: These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with +0.5deg camber improvements into these arms to optimise wheel alignments settings for street and track performance. Whiteline's rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced 'toe-change' during hard cornering, creating impressive turn-in ability! The more positive location of the arm through the range of suspension movement and gains in alignment geometry ensures the car feels more responsive and engaging at turn-in, mid corner and corner exit.
Front Lower Control Arm - Arm to Suit Subaru Impreza GD WRX STi

ℹ️ Performance alloy - fixed +0.5deg caster + anti-lift correction

Enhances steering response, delivering sharper handling and more predictable vehicle dynamics; the perfect, complete upgrade. Includes: 2 Arms

Pre-Order
Available for Preorder. Ships within 4-6 weeks.
Available for Preorder. Ships within 4-6 weeks.

Qty Required 1

Kit Contents 2 Arms
£993.71
Front Lower Control Arm Kit to Suit Toyota Camry XV70

In Stock
Ships within 48hrs.
Ships within 48hrs.

SKU: KTA484 Benefit Note:Complete replacement control arms feature increased static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Front Lower Control Arm Kit to Suit Toyota Camry XV70

ℹ️ Performance - adds +0.5deg caster correction

Delivers a balanced mix of comfort, precision, and durability; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 48hrs.
Ships within 48hrs.

Qty Required 1

Kit Contents 2 Arms
£293.28