What makes Whiteline different from OEM suspension components?

Whiteline suspension products are engineered for performance and durability well beyond OEM standards. While factory (OEM) components often use soft rubber bushings that degrade over time and under load, Whiteline uses advanced polyurethane and bushing technology that resists oil, heat, abrasion, and weathering. This results in sharper handling, more responsive steering, better load control, and significantly improved lifespan — without the harshness of traditional solid bushings.

Do I need a wheel alignment after installing Whiteline components?

It’s recommended to perform a wheel alignment after installation to ensure optimal performance and tire wear.

Are Whiteline Fixed Offset Upper Control Arms (UCAs) necessary for lifted vehicles?

They help maintain correct alignment and steering geometry after a vehicle is lifted.

Can I install Whiteline products myself?

Some products are DIY-friendly, but professional installation is recommended for suspension components.

Do Whiteline products come with a warranty?

Yes. Please refer to our warranty policy for details.

Suspension Arms with Fitting Position Front Axle for MAZDA BT-50 UP

IMPROVE GRIP, HANDLING & PERFORMANCE.

Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that’s what it’s all about. You also get improved tyre wear as your tyres stay fletter and more upright. Comfort improves because your car sits flatter through bends meaning less movement inside the vehicle

Change Vehicle

Front Control Arm Lower - Arm Assembly-Left
✅ Fits MAZDA BT-50 UP

In Stock
Ships within 24hrs.
Ships within 24hrs.

SKU: WA440L Benefit Note:
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints.
Front Control Arm Lower - Arm Assembly-Left
✅ Fits MAZDA BT-50 UP

ℹ️ Replacement and repair upgrade - Includes ball joint

Ensures long-lasting durability, matter matter the purpose; the perfect, complete upgrade. Includes: 1 Arm

In Stock
Ships within 24hrs.
Ships within 24hrs.

Qty Required 1

Kit Contents 1 Arm
$377.66
Front Control Arm Lower - Arm Assembly-Right
✅ Fits MAZDA BT-50 UP

Pre-Order
Available for Preorder. Stock due on 9/5/2026.
Available for Preorder. Stock due on 9/5/2026.

SKU: WA440R Benefit Note:
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints.
Front Control Arm Lower - Arm Assembly-Right
✅ Fits MAZDA BT-50 UP

ℹ️ Replacement and repair upgrade - Includes ball joint

Delivers a balanced mix of comfort, precision, and durability; the perfect, complete upgrade. Includes: 1 Arm

Pre-Order
Available for Preorder. Stock due on 9/5/2026.
Available for Preorder. Stock due on 9/5/2026.

Qty Required 1

Kit Contents 1 Arm
$377.66
Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

In Stock
Ships within 24hrs.
Ships within 24hrs.

SKU: KTA240 Benefit Note:
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

ℹ️ Fixed offset alignment correction arms - Includes ball joint

Greatly increases control and confidence; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 24hrs.
Ships within 24hrs.

Qty Required 1

Kit Contents 2 Arms
$1088.44
Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

In Stock
Ships within 24hrs.
Ships within 24hrs.

SKU: KTA344 Benefit Note:
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline adjustable UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +0.5 to +3.5 degrees of caster and -1.5 to +1.5 degrees of camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

ℹ️ Performance - Adjustable alignment correction arms

Maximises tyre contact with the road, improving cornering and grip; the perfect, complete upgrade. Includes: 2 Arms

In Stock
Ships within 24hrs.
Ships within 24hrs.

Qty Required 1

Kit Contents 2 Arms
$1100.00
Front Control Arm Upper - Ball Joint Service Kit
✅ Fits MAZDA BT-50 UP

In Stock
Ships within 24hrs.
Ships within 24hrs.

SKU: KSK128 Benefit Note:
Service kit to suit Whiteline Fixed Offset Upper Control Arms
Front Control Arm Upper - Ball Joint Service Kit
✅ Fits MAZDA BT-50 UP

ℹ️ Suits Whiteline KTA240

Delivers a balanced mix of comfort, precision, and durability; the perfect, complete upgrade. Includes: 2 Boots, 2 Clips

In Stock
Ships within 24hrs.
Ships within 24hrs.

Qty Required 1

Kit Contents 2 Boots, 2 Clips
$21.46

Qty Required 1
Kit Contents 1 Arm

Qty Required 1
Kit Contents 1 Arm

Qty Required 1
Kit Contents 2 Arms

Qty Required 1
Kit Contents 2 Arms

Qty Required 1
Kit Contents 2 Boots, 2 Clips

Clear all

Done

Suspension & Chassis Components

Suspension Arms with Fitting Position Front Axle for MAZDA BT-50 UP

IMPROVE GRIP, HANDLING & PERFORMANCE.

Front Control Arm Lower - Arm Assembly-Left
✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Left
✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Right
✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Right
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Ball Joint Service Kit
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Ball Joint Service Kit
✅ Fits MAZDA BT-50 UP

Refine your search

Category

Fitting Position

Can’t find what you’re looking for?

Suspension & Chassis Components

Suspension Arms with Fitting Position Front Axle for MAZDA BT-50 UP

IMPROVE GRIP, HANDLING & PERFORMANCE.

Front Control Arm Lower - Arm Assembly-Left ✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Left ✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Right ✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Right ✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly ✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly ✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly ✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly ✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Ball Joint Service Kit ✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Ball Joint Service Kit ✅ Fits MAZDA BT-50 UP

Refine your search

Category

Fitting Position

Can’t find what you’re looking for?

Front Control Arm Lower - Arm Assembly-Left
✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Left
✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Right
✅ Fits MAZDA BT-50 UP

Front Control Arm Lower - Arm Assembly-Right
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Arm Assembly
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Ball Joint Service Kit
✅ Fits MAZDA BT-50 UP

Front Control Arm Upper - Ball Joint Service Kit
✅ Fits MAZDA BT-50 UP