Complete Bushing Kits with Fitting Position Front and Rear

A complete bushing kit covers every position on the car, or every position at one end of it, in a single part number. Rather than fixing one joint now and another in eighteen months, the whole suspension gets done at once.

It is also the only way a bush upgrade actually delivers what it promises.

Why Piecemeal Never Feels Like an Upgrade

Fit polyurethane bushes to one position and leave the rest and you will notice less than you expected. There is a reason for that, and it is not the parts.

A suspension is a system, and every joint in it is contributing to how much the geometry moves under load. Replace one bush and you have removed deflection at that pivot while every other pivot on the car carries on flexing exactly as it was. The arm is tighter, the alignment still moves, and the vehicle still goes vague when you load it up.

It gets worse than neutral. A fresh polyurethane bush holds its position properly while the tired rubber next to it deflects, so the two ends of the same arm now behave differently under the same input. What you feel through the steering is that mismatch, and plenty of people conclude the upgrade was not worth it when the real problem is that they only did half of it.

Do the whole car and the effect is entirely different. Every joint is holding, so the geometry stays where the aligner set it, the steering has a directness it has not had for years, and the car responds immediately rather than leaning, settling and then turning.

The Labour Is the Cost

The economics reinforce it, because bushes are cheap and getting to them is not.

Almost every position needs the arm or component off the car and the old bush pressed out, and that work takes the same time whether you are replacing one bush or every bush on the corner. Do a single position today and you pay for the teardown, the press work and a wheel alignment. Do the next one next year and you pay for all three again, having gained nothing for the second round of labour.

Fit a complete kit while everything is already apart and the cost per position collapses. One workshop booking, one session at the press, one alignment. For anyone paying someone else to do the work, that difference is usually larger than the kit costs in the first place.

It is also why a complete kit is close to free in labour terms if the suspension is coming apart anyway. If the arms are off for ball joints, the front end is stripped for a lift or lowering springs, or the subframe is down for anything at all, the bushes will never be cheaper to replace than at that exact moment.

Bushes Age Together

Suspension bushes do not fail one at a time in any meaningful sense. They have all covered the same kilometres, in the same weather, carrying the same loads, so when one has perished the rest are rarely far behind.

Replacing a single position tends to mean chasing the noise rather than fixing the cause, and the next clunk usually turns up a few months later from the joint beside the one you just did.

That is especially true on a high kilometre 4WD or older performance car still running its original rubber. Everything under it is the same age, and the original bushes were specified for a standard vehicle carrying standard loads, which is rarely what those vehicles are doing now.

Kit Levels

Kits come at several depths and it is worth knowing which one you are looking at.

A single position kit covers one joint, which is the right purchase when you have diagnosed a specific fault and the rest of the suspension is genuinely healthy.

Grouped front and rear kits cover the positions with the most influence on how the car drives, which for a lot of owners is the practical sweet spot. You get the handling change without dismantling every last mounting point on the vehicle.

Complete vehicle kits cover every position the car has. That suits an older vehicle still on original rubber, a restoration, or a build where you want the suspension sorted properly once and then forgotten about.

Check each listing for exactly which positions it covers, since layouts differ enormously between vehicles.

When a Complete Kit Is the Wrong Call

Worth being straight about the cases where this is not the right purchase.

If you have diagnosed one specific failure and everything else is sound, buy that one kit and keep the difference. If the arms themselves are bent, corroded or have mounting eyes worn oval, no bush will fix that and you are looking at replacement components. And if the car is being sold shortly, the labour in a full refresh is hard to justify against what you will get back.

Complete kits also make far less sense spread across a year of weekends. Most of the value is in doing everything in one teardown, so working through the list gradually means paying complete kit money for single kit economics.

Planning the Job

Set aside proper time. A complete kit is not an afternoon, and rushing it is how mounting eyes get damaged.

Almost every position needs a press, and a correct diameter press tool is what stands between a clean install and a ruined arm. Check each eye as the old bush comes out, because a bore worn oval will not hold a new bush and means that component needs replacing rather than rebushing.

Fit the crush tubes and sleeves supplied, since the tube carries clamping load from the bolt and a bush fitted without one gets crushed the moment it is torqued.

Grease on assembly with a lubricant made for polyurethane rather than whatever is on the bench. Silicone and PTFE based greases are the right choice, while ordinary lithium and petroleum based greases can degrade the material over time. Grease the bore and the crush tube, not just one of them, because a dry bush wears its way to a fit and squeaks.

Torque everything with the car on its wheels at ride height rather than hanging on the hoist. Whatever position a bush is clamped in becomes its neutral position, and one tightened at full droop spends its life twisted. With a complete kit that applies to dozens of fasteners, so work through them methodically rather than from memory at the end of a long day.

Book the wheel alignment for the same visit, because replacing this many bushes changes every angle the machine measures.

Find Complete Bushing Kits for Your Vehicle

Prefer to target one area? Individual control arm bushes and anti roll bar bushes are also available.

Select your vehicle to see the complete, front, rear and single position kits available for it, and check each listing for the positions it covers. Every Whiteline component is backed by our warranty, a fitment guarantee and 30 day returns.