Universal Coil Spring Spacers with Fitting Position Front and Rear, Front Axle, Rear Axle

Whiteline coil spring spacers give you a simple, cost-effective way to fine-tune ride height on coil-sprung vehicles. Fitted at the spring seat or strut top, they add a small, controlled amount of height. Use them to level a vehicle that sits unevenly, compensate for accessory weight, or add a modest lift for extra clearance.

Made from durable polyurethane, the range includes coil spring spacers, spring pads, insulators and seats in a variety of thicknesses and configurations. They suit 4WDs and 4x4s, pick-ups, SUVs, passenger cars and classic restorations.

What Coil Spring Spacers Are

A coil spring spacer is a firm, flat or shaped component that sits at the top or bottom of a coil spring, between the spring and its seat or perch. By raising the point where the spring sits, it lifts the vehicle?s body by roughly the spacer?s thickness, or by a proportion of it, depending on the suspension design.

Unlike replacement springs, spacers don?t change the spring itself. They reposition it. That makes them quick to fit, easy to reverse, and ideal for small, precise height adjustments.

Types of Coil Spring Spacers and Pads

Upper and Lower Coil Spring Pads

Coil spring pads fit at the upper or lower spring seat. Depending on thickness, they can restore standard height, correct a lean or add a little lift. They also replace worn factory rubber pads that have compressed or perished.

Strut Top Spacers

On strut-equipped vehicles, strut top spacers fit between the top of the strut assembly and the body. They raise ride height slightly without dismantling the spring and strut.

Coil Spring Insulators and Seats

Insulators and seats locate the spring correctly and prevent metal-to-metal contact between the spring and its mount. Renewing them reduces noise, keeps the spring seated properly and can restore height lost as old rubber compressed.

Coilover Spring Spacers

Coilover spring spacers sit between main and tender springs on coilover setups. They help set the correct spring arrangement and preload.

When Coil Spring Spacers Make Sense

Coil spring spacers are most effective for:

• Levelling a vehicle that sits lower on one side or at one end, for example due to a fuel tank, fridge, drawers or a driver-side weight bias
• Compensating for accessories such as a bullbar, winch or roof rack that cause the front or rear to sit lower
• Fine-tuning ride height when a vehicle is a little off the height you want
• Adding a modest lift to clear slightly larger tyres or gain a little ground clearance
• Restoring height after worn pads have compressed or broken down

Each listing shows the height change and fitting position, so you can choose the right spacer for the result you need.

What Spacers Don?t Change

A spacer changes where the spring sits, not how the spring behaves. The spring rate and load-carrying capacity stay the same.

That?s why spacers are well suited to levelling and small height corrections, but they aren?t a substitute for heavier-rated springs. If your vehicle regularly carries heavy loads or tows, or if the springs themselves have sagged significantly, uprated or replacement springs are the right solution. Spacers can then be used to fine-tune the final height.

Limitations and Things to Check

Raising ride height with spacers changes the suspension?s position, just as a full lift kit does. Before and after fitting, check:

• Suspension travel: raising the static height can reduce the travel available for the wheel to drop, and change where the bump stops engage.
• Wheel alignment: camber, caster and toe will change with ride height, so an alignment is essential after fitting.
• Driveline angles: on independent front suspension 4x4s, extra height increases CV joint angles. Keep lifts modest.
• Clearances: check brake lines, ABS wiring and breather hoses for slack at full droop, and confirm the spring doesn?t foul the control arms.
• Aftermarket suspension: if your vehicle already has aftermarket springs or shocks, confirm compatibility before adding spacers.

Used correctly and within sensible limits, spacers are a safe and effective adjustment. Problems usually arise when they?re used to achieve larger lifts than the rest of the suspension is designed for.

Choosing Quality Coil Spring Spacers

Not all spacers are equal. Look for:

• Durable material: quality polyurethane resists compression, oil, heat and weathering. It holds its height far longer than rubber or foam alternatives.
• Correct fit: the spacer must match the spring diameter, spring end and seat shape, so it locates securely and can?t move or fall out.
• Engineered design: spacers designed for specific spring and seat configurations keep the spring correctly aligned, unlike generic one-size-fits-all discs.
• Appropriate thickness: choose the smallest spacer that achieves your goal, rather than the largest available.

Compliance and Vehicle Standards

Ride height modifications are regulated differently between countries and regions. Small height adjustments are generally acceptable, but the rules depend on how much the vehicle is raised, whether parts are properly engineered, and how they?re fitted.

Before modifying ride height, check the vehicle standards and inspection requirements that apply where the vehicle is registered. In Europe, check periodic inspection requirements. Also tell your insurer about any suspension modification.

Installation and Wheel Alignment

Coil spring spacers can be fitted by a workshop or an experienced home mechanic with the right equipment. Depending on the design, fitting may require removing the spring or strut, and some installations need a spring compressor. Follow the kit instructions and the vehicle manufacturer?s procedures, and tighten all fasteners to specification.

Always have a wheel alignment carried out after fitting, as any change in ride height affects camber, caster and toe.

Who Coil Spring Spacers Suit

Coil spring spacers suit 4WD and 4x4 owners levelling their vehicle or compensating for accessory weight, and drivers wanting a modest, reversible lift for slightly larger tyres. They?re also used by owners of cars, SUVs and classics replacing worn spring pads and correcting a lean, and by workshops carrying out precise ride height corrections without full spring replacement.

Shop Universal Coil Spring Spacers

Coil spring spacers belong to our universal parts range, and universal bump stops keep travel in check after a height change.

Choose the spacer type, fitting position and height change that suit your vehicle, then order online for delivery or have them fitted by an authorised Whiteline reseller. Every Whiteline component comes with our warranty and fitment guarantee, plus 30 days to return anything that isn?t right for your vehicle. Get your ride height exactly where you want it with Whiteline.