Bushing & Bearing Press Tool Kits for VW GOLF PLUS

Remove and install suspension bushes, bearings and spherical joints with a Whiteline bushing and bearing press tool kit designed for workshop or on-car use. The 26-piece kit combines a broad selection of mild-steel pressing sleeves with press plates and pulling spindles, providing a dedicated alternative to improvising with sockets or old bearing shells.

Whether you're installing polyurethane suspension bushes or working with other compatible press-fit components, the kit provides multiple sleeve sizes and spindle options to help match the tool setup to the job.

What Is a Bush and Bearing Press Kit?

A bearing press kit uses appropriately sized sleeves, plates and pulling spindles to apply controlled force when removing or installing compatible press-fit components. Rather than relying on a single fixed tool size, different sleeves can be selected according to the diameter and arrangement of the component being pressed.

Whiteline's kit is designed for bushes, bearings and spherical joints, including the installation and removal of compatible polyurethane suspension bushes. It can be operated directly on suitable vehicle components or used alongside a conventional workshop press, depending on the job and available access.

A bearing press tool kit should not be confused with a hydraulic bearing press itself. The kit provides the sleeves, plates and pulling hardware used to perform pressing work, while it can also be used with a workshop press when that method is more appropriate.

Why Use a Press Kit Instead of Sockets on Your VW GOLF PLUS?

Improvised pressing tools such as sockets and old bearing shells may appear to provide the right diameter, but Whiteline specifically warns against this approach because heat-treated steel can shatter when subjected to pressing loads.

Whiteline's press sleeves are instead manufactured from mild steel. According to Whiteline, this allows the sleeve to distort or crush if it is over-pressed rather than behaving in the same way as the hardened components commonly improvised for the job.

That doesn't make a press operation automatically safe. Pressing components still involves substantial force, so the correct sleeve and support arrangement need to be selected and the component must be positioned securely before force is applied.

Using a purpose-designed bush press kit also provides a broader choice of sleeve diameters, helping the installer match the pressing tool more closely to the bush, bearing or joint being removed or installed.

What's Included in the 26-Piece Press Tool Kit?

The Whiteline bushing and bearing press tool kit contains the primary components required to configure the tool for a variety of compatible pressing jobs.

The 26-piece kit includes:

• 18 pressing sleeves covering diameters from 28 mm to 113 mm in 5 mm increments
• 4 press plates for configuring and supporting the pressing arrangement
• 4 pulling spindles covering M10, M12, M14 and M16 sizes

The pulling spindles use rolled threads, while Whiteline specifies nuts with double washers and encapsulated lubricated ball bearings. This arrangement is designed to help prevent the nuts from binding and damaging the spindle threads while force is being applied.

Having multiple sleeve and spindle sizes makes the kit adaptable to different press-fit components, but the installer still needs to choose a combination that correctly supports the component and surrounding structure.

Can You Press Suspension Bushes on your VW GOLF PLUS?

Whiteline's press tool kit can be used on the car, provided the component and available access allow the tool to be configured correctly. It can also be used with a workshop press when removing the suspension component is necessary or when bench pressing is the more suitable approach.

On-car pressing can reduce the amount of disassembly required for suitable jobs, but it isn't automatically the best method for every bush or bearing. Access, component design, surrounding hardware and the direction in which the component needs to be pressed all affect whether an on-car installation is practical.

If the component cannot be properly supported or the pressing tool cannot be positioned squarely, remove the relevant part and use an appropriate workshop setup instead.

Bushes, Bearings and Spherical Joint Pressing

The Whiteline kit is intended for bushings, bearings and spherical joints, making it useful for workshops and enthusiasts performing suspension servicing and upgrades. Its sleeve range allows the tool to be configured around different component diameters rather than limiting it to one specific suspension bush.

For polyurethane suspension work, the kit can assist with removing compatible original bushes and installing Whiteline polyurethane bushes where pressing is required. Bearings and spherical joints can also be serviced where their dimensions and installation arrangement are compatible with the available sleeves, plates and pulling spindles.

Whiteline does not specifically identify this kit as a dedicated wheel bearing tool, so wheel bearing compatibility should be confirmed for the particular job rather than assumed from the general bearing description.

Safe Use of a Bearing Press Tool Kit

Pressing suspension bushes, bearings and joints requires controlled force and correct support. Select a sleeve that contacts the appropriate part of the component without loading an area that could be damaged, and make sure the receiving side has enough clearance for the component as it is pressed out.

Keep the pressing arrangement square and correctly supported rather than continuing to apply force if the component begins to tilt, bind or move unexpectedly. Avoid over-pressing once the component has reached its correct position.

Wear appropriate personal protective equipment, including eye protection, and keep clear of the direction in which components or tooling could move if the setup slips or fails under load.

The correct procedure varies between suspension components and vehicles. If you're unsure how a bush, bearing or spherical joint should be supported, removed or installed, use a qualified technician rather than applying additional force to an uncertain setup.

Shop Bush & Bearing Press Kits for Your VW GOLF PLUS with Whiteline

Shop bush and bearing press tools for your VW GOLF PLUS with Whiteline for suspension servicing, polyurethane bush installation and compatible bearing and spherical joint work. The 26-piece setup provides multiple pressing sleeves, plates and pulling spindle sizes for workshop or suitable on-car applications.

Every Whiteline component is backed by our warranty, Fitment Guarantee and 60 Day Returns, giving you added confidence when choosing tools for your suspension work.

Fitting polyurethane at home? Our automotive tools range also covers wheel alignment tools for checking the result.

If you're unsure whether the press kit is suitable for the component you're working on, contact our team for technical assistance before starting the job.