Lowering Blocks for CHRYSLER VALIANT CL-CM

CL-CM VALIANT lowering blocks provide a straightforward way to reduce rear ride height on compatible leaf-spring suspension systems. Fitted between the leaf spring and axle on suitable spring-under-axle layouts, they change the axle-to-spring spacing so the rear of your CL-CM VALIANT sits lower without replacing the leaf spring itself.

A rear lowering block kit needs to match your CL-CM VALIANT's suspension layout, axle mounting arrangement and intended reduction in ride height. Lowering also changes available suspension travel and can affect driveline geometry, bump stop clearance and how the suspension behaves under load, so the complete setup should be considered before choosing a block height.

What Are CL-CM VALIANT Lowering Blocks?

Lowering blocks for leaf springs are solid spacers installed between the axle and leaf spring on compatible suspension layouts to reduce rear ride height.

They are used where the axle and spring arrangement allows additional spacing to move the axle farther from the spring in a direction that lowers the body relative to the axle.

The block forms part of a safety-critical axle mounting assembly. Correct dimensions, locating features and suitable U-bolts are therefore essential.

Lowering blocks should not be confused with lift blocks. Although the components can appear similar, their intended geometry and application are different. A block should only be used in the suspension configuration for which it is designed.

How Do CL-CM VALIANT Leaf Spring Lowering Blocks Work?

Leaf spring lowering blocks change the spacing between the axle and leaf spring. On a compatible spring-under-axle suspension, increasing this spacing changes the body's position relative to the axle, reducing rear ride height.

The amount of lowering is generally related to the height of the block, although the final result should always be checked on your CL-CM VALIANT.

Lowering the rear suspension this way does not change the leaf spring itself. However, it does alter other relationships within the suspension and driveline, which is why block height should be chosen as part of the complete suspension setup.

Where the Block Sits Between the Spring and Axle

The lowering block sits at the axle-to-leaf-spring mounting point and must locate correctly between the two components.

U-bolts then clamp the axle, lowering block and spring assembly together.

Correct location is critical. The axle must remain positively located rather than relying solely on clamping force to prevent movement.

Because the block adds distance to the assembly, suitable U-bolts of the correct dimensions are required. Fastener selection and installation are safety-critical and should follow the requirements of the specific application.

Choosing a CL-CM VALIANT Lowering Block Size

Lowering block size determines how much the rear ride height is changed on a compatible suspension setup. Common searches include 1 inch lowering blocks and 2 inch lowering blocks, but the largest available block should not automatically be considered the best choice.

Choose the amount of lowering according to your CL-CM VALIANT, available suspension travel, tyre clearance, bump stop position, driveline geometry and how your CL-CM VALIANT is used.

CL-CM VALIANT 1 and 1.5 Inch Lowering Blocks

A smaller change in ride height can be suitable where the aim is a more moderate reduction at the rear.

A 1 inch lowering block is approximately 25mm, while 1.5 inches is approximately 38mm.

Even a relatively small change should be checked for its effect on suspension travel and surrounding clearances. The visual change in ride height is only one part of the decision.

CL-CM VALIANT 2 and 2.5 Inch Lowering Blocks

A 2 inch lowering block represents approximately 50mm of block height, while 2.5 inches is approximately 63mm.

Greater lowering can make changes to available compression travel, bump stop clearance and driveline angles more significant.

Before choosing a taller block, check that the suspension can operate safely through its required range of movement and that the resulting ride height complies with applicable vehicle modification requirements.

What Is Included in a CL-CM VALIANT Lowering Block Kit?

A lowering block kit typically combines the blocks with the mounting hardware required to secure the axle and leaf spring assembly.

The exact components and dimensions depend on the application, so kit contents should be confirmed for the specific fitment rather than assumed.

U-bolts are particularly important because adding a block changes the required fastener length. They must have the correct diameter, thread, shape and length for the axle and mounting arrangement.

Do not substitute generic fasteners simply because they appear to fit. The axle-to-spring connection carries significant loads during braking, acceleration and suspension movement.

Are CL-CM VALIANT Lowering Blocks Legal?

Whether lowering blocks are legal depends on your CL-CM VALIANT, amount of lowering, installation and the modification rules that apply in your Australian state or territory.

Requirements can cover minimum ground clearance, suspension travel, vehicle height and whether engineering approval is required.

Rules can also change, so a modification that is permitted in one jurisdiction should not automatically be assumed to comply elsewhere.

Before fitting lowering blocks, check the current requirements with the relevant state or territory road authority. If the planned modification falls outside straightforward permitted limits or its compliance is uncertain, consult an appropriately qualified vehicle engineer.

Do CL-CM VALIANT Lowering Blocks Affect Ride, Handling or Load Carrying?

Lowering blocks can affect how the suspension behaves because reducing ride height changes available suspension travel and can alter driveline and suspension geometry.

The block does not change the spring rate of the leaf spring itself, but that does not mean the rest of your CL-CM VALIANT behaves exactly as it did before lowering.

The effect depends on the amount of lowering and the complete suspension setup.

Suspension Travel and Bump Stops

Lowering your CL-CM VALIANT can reduce the distance available before the suspension reaches its bump stops.

If too little compression travel remains, your CL-CM VALIANT may contact the bump stops more frequently over larger bumps or when carrying load. This can produce a harsher response and limit useful suspension movement.

Bump stop clearance should therefore be checked as part of the lowering setup.

Shock absorber operating position and available travel also need consideration. Lowering should not leave a damper operating outside an appropriate range or allow other components to reach their mechanical limits.

Towing and Carrying Loads

Load causes the rear suspension to compress, reducing ride height further. Your CL-CM VALIANT that already has less available compression travel after lowering may therefore reach its bump stops sooner when carrying cargo or supporting trailer download.

Consider:

• Normal vehicle load
• Available suspension travel
• Bump stop clearance
• Shock absorber travel
• Tyre and body clearance
• Driveline angles

Lowering blocks do not increase your CL-CM VALIANT's load or towing capacity. Always remain within your CL-CM VALIANT manufacturer's applicable load and towing limits.

If your CL-CM VALIANT regularly carries significant loads or tows, that use should be considered before deciding how much to lower it.

How Are CL-CM VALIANT Lowering Blocks Fitted?

Installing lowering blocks generally involves supporting your CL-CM VALIANT and axle, releasing the leaf-spring-to-axle connection, positioning the blocks correctly and securing the assembly with suitable U-bolts.

Because the axle mounting is safety-critical, correct positioning, hardware and fastener torque are essential.

What the Job Involves

A typical installation may involve:

• Safely raising and supporting your CL-CM VALIANT
• Supporting the axle independently
• Removing the existing U-bolts and mounting hardware
• Checking the spring seat and mounting surfaces
• Positioning each lowering block correctly
• Confirming positive location between the spring, block and axle
• Installing the appropriate U-bolts and hardware
• Tightening the fasteners evenly to the specified torque
• Checking suspension, tyre and driveline clearances
• Checking the final ride height and suspension operation

The axle should remain properly supported and controlled while its mounting hardware is removed.

Installation and Safety

Never work underneath your CL-CM VALIANT supported only by a jack. Use suitable stands or workshop lifting equipment and support the axle correctly before releasing its mounting hardware.

U-bolts are critical suspension fasteners. Follow the installation instructions regarding whether new fasteners are required, the tightening sequence, torque specification and any specified post-installation torque check. Do not automatically reuse U-bolts unless the applicable manufacturer procedure specifically permits it.

After lowering, inspect suspension travel, bump stop clearance, shock absorber travel and driveline geometry. A qualified technician should perform the installation if you do not have the equipment or experience required to work safely on the axle and leaf-spring assembly.

Choosing Lowering Blocks for Your CL-CM VALIANT

Choose lowering blocks according to your CL-CM VALIANT's leaf-spring layout, axle mounting arrangement and intended ride-height change.

Also consider suspension travel, bump stop clearance, shock absorber operation, tyre clearance, driveline geometry and how your CL-CM VALIANT is normally loaded.

Fitment should be confirmed for the specific application rather than choosing a block based only on its advertised height. Whiteline can assist with fitment if you are unsure which lowering solution is appropriate for your setup.

Shop CL-CM VALIANT Lowering Blocks with Whiteline

Whiteline lowering blocks for your CL-CM VALIANT provide a way to reduce rear ride height on compatible leaf-spring suspension systems while retaining the existing leaf springs.

Lowering blocks are part of our suspension parts range, with universal lowering blocks for custom setups.

Choose the correct fitment and lowering height with the added confidence of Whiteline's Fitment Guarantee, warranty and 60 Day Returns, with fitment assistance available when you need help identifying the appropriate setup for your CL-CM VALIANT.