For the best shopping experience, please configure your vehicle now.
Activate more grip
Search for your performance upgrade.
Search by
Suspension & Chassis Components
ACTIVATE MORE GRIP.
Suspension Arms with Fitting Position Front Axle forVehicle
Suspension Arms with Fitting Position Front Axle forVehicle
IMPROVE GRIP, HANDLING & PERFORMANCE.
Cornering loads are spread more evenly across the tyres delivering more grip and frankly, that’s what it’s all about. You also get improved tyre wear as your tyres stay fletter and more upright. Comfort improves because your car sits flatter through bends meaning less movement inside the vehicle
Whiteline KTA383 for the BMW F22 2-Series and F3X 3/4-Series is a set of 4 complete arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber tension strut arm bushings tend to take a beating and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting.
For ease of fitment these new alloy tension arms also come complete with sealed ball joint ends and adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg caster adjustment for improved straight-line stability, enhanced steering feel, and stronger front-end grip on corner entry.
The F8X M car upgraded front control arms feature sealed inner bearings to provide superior precision, durability, and reduced deflection under load. They add a fixed 0.5 deg negative camber by pushing the bottom of the wheel outward and weight slightly less than the stock F22/F3X control arms. This is the perfect upgrade for track and autocross cars that demand more negative front camber.
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
SKU: KTA287Benefit Note:Thesefront lower control arms (also know as “wishbone†by BMW) is a direct fit for the F80 M3, F82/F83 M4 and serves as a popular performance upgrade for the F22 2-Series and F3X 3/4-Series. Unlike standard arms that rely on soft rubber bushings, the M3/M4 wishbone features sealed inner and outer ball joints, providing superior precision, durability, and reduced deflection under load. The ball joint design allows the control arm to articulate freely with minimal resistance, delivering sharper steering response and more consistent suspension geometry. When installed on F22 and F3X models, this arm increases negative front camber by approximately 0.5 degrees by pushing the lower portion of the wheel outward, while also being slightly lighter than the factory control arm.
This makes it an ideal upgrade for track and autocross applications, improving front-end grip, turn-in, and overall handling without compromising reliability.
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.0 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
SKU: KTA365Benefit Note: Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
SKU: KTA366Benefit Note: Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
SKU: KTA367Benefit Note: Complete replacement control arms feature increased static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
SKU: KTA289Benefit Note: These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with +0.5deg camber improvements into these arms to optimise wheel alignments settings for street and track performance. Whiteline's rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced 'toe-change' during hard cornering, creating impressive turn-in ability! The more positive location of the arm through the range of suspension movement and gains in alignment geometry ensures the car feels more responsive and engaging at turn-in, mid corner and corner exit.
SKU: KTA290Benefit Note: These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with +0.5deg camber improvements into these arms to optimise wheel alignments settings for street and track performance. Whiteline's rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced 'toe-change' during hard cornering, creating impressive turn-in ability! The more positive location of the arm through the range of suspension movement and gains in alignment geometry ensures the car feels more responsive and engaging at turn-in, mid corner and corner exit.
SKU: KTA484Benefit Note:Complete replacement control arms feature increased static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Optimizes suspension geometry for lowered vehicles by repositioning the lower ball joint and tie rod ends.
Improves front-end stability and cornering grip by reducing body roll.
Enhances steering precision and feedback, reducing understeer in aggressive driving conditions.
2. Bump Steer Correction
Incorporates optimized tie rod lengths to minimize unwanted steering inputs caused by suspension compression and rebound.
Reduces unpredictable handling characteristics at high speeds or on uneven surfaces.
Ensures consistent and precise steering response, improving driver confidence.
3. Anti-Lift / Anti-Dive Geometry Correction
Optimized pivot points and reinforced arm design reduce front-end lift under acceleration and minimize dive under braking.
Enhances overall chassis balance by improving weight transfer dynamics.
Provides better traction and braking stability, particularly beneficial in motorsports applications.
4. Adjustable Camber & Caster Correction
Camber correction: Fine-tune camber settings to improve tire contact patch for superior cornering grip.
Caster correction: Increased caster settings allow for enhanced high-speed stability, improved turn-in response, and better self-centering steering.
Ideal for enthusiasts seeking maximum GRIP for street, autocross, and track use.
5. Robust Construction & Premium Materials
Hot Forged Aluminium with CNC post machining for superior strength-to-weight ratio.
Reinforced spherical bearing and high durability polyurethane to ensure minimal deflection and precise handling.
Corrosion-resistant anodized finish for longevity and protection against harsh road conditions.
6. Direct Bolt-On Installation
OEM-compatible fitment, designed to work with factory and aftermarket suspension components.
Includes all necessary hardware and detailed installation instructions for a straightforward installation process.
No major modifications required, making it a plug-and-play upgrade for performance-oriented WRX owners.
Whether you're a weekend track enthusiast, a daily spirited driver, or a dedicated motorsports competitor, this front lower control arm will significantly enhance the handling and stability of your WRX. Upgrade your Subaru WRX today and experience the ultimate in suspension performance! Benefit Note: This high-performance Front Lower Control Arm (FLCA) is designed specifically for the Subaru WRX VB, VN to enhance suspension geometry and improve handling dynamics. Engineered for track-ready performance while maintaining daily drivability, these control arms offer comprehensive geometry corrections, including roll center correction, bump steer correction, anti-lift/anti-dive geometry correction, as well as camber and caster adjustments.
SKU: KTA319Benefit Note:A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.0 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
AU
United Kingdom
Europe
United States
