Lowering springs swap your factory springs for shorter, firmer ones with a fixed, engineered drop, and keep your existing shocks. Coilovers replace the whole spring and damper with an adjustable unit. For most Aussie street cars, lowering springs paired with sway bars give the best mix of handling, comfort, legality and cost, while coilovers suit dedicated track builds.
Ask a group of enthusiasts whether to go coilovers or lowering springs and you’ll get a heated debate. Both lower the car, both can improve handling and both have a place. The right answer depends on how you use the car, what roads you drive on and how much time you want to spend tuning. Here’s how they compare, and why so many street builds start with a set of lowering springs.
How are lowering springs and coilovers different?
Lowering springs only replace the coil springs. They’re designed for your specific car, with a set drop and a firmer rate, and they work with your existing struts or shocks. Fit them, align the car and you’re done.
Coilovers combine the spring and damper into one adjustable assembly. A threaded body lets you set ride height, and many coilovers also have adjustable damping. That flexibility is great for fine tuning, but it means more setup and a higher price.


Lowering springs vs coilovers compared
|
Factor |
Lowering springs |
Coilovers |
|
Parts replaced |
Springs only |
Springs and dampers |
|
Ride height |
Fixed, engineered drop |
Adjustable |
|
Damping |
Uses existing shocks |
Often adjustable |
|
Cost |
Lower |
Higher |
|
Setup time |
Fit and align |
Height, damping, alignment, often corner weights |
|
Staying within lowering rules |
Easy with modest drops |
Easy to go too low |
|
Daily comfort |
Easy to get right |
Depends on setup |
|
Best for |
Street cars, daily drivers |
Track focused builds |
Why lowering springs suit most Australian street cars
Australian roads range from smooth freeways to coarse chip seal and potholed country bitumen. A car that’s too low or too stiff struggles on the rough stuff. Lowering springs with a modest drop keep enough suspension travel to cope, and our rates are chosen to work with healthy factory dampers.
They also make staying legal straightforward. Our drops are platform-specific and modest, typically well within the national guideline of 50mm total height change. With coilovers, it’s easy to wind the car down too far and end up below the 100mm ground clearance limit.
When do coilovers make more sense?
If you’re building a dedicated track or time attack car, want to corner weight the car, or need a much lower ride height for competition, coilovers are the right tool. They’re also worth considering if your factory dampers are worn and you’d be replacing them anyway.
Just budget time for setup, because badly adjusted coilovers can ride worse than stock and handle no better.
Which handles better on the street?
On the road, a matched set of lowering springs with adjustable sway bars and polyurethane bushes often feels just as sharp as a mid-range coilover setup, and more settled over bumps. Most of the handling gain on a street car comes from controlling body roll and holding the geometry steady. Sway bars and bushes do that very efficiently, leaving the springs to handle ride height and pitch.
Get the best of both with a matched kit
Our performance suspension kits combine lowering springs with adjustable sway bars, links and polyurethane bushes, all developed together for each platform. You get a lower, flatter car with adjustable balance through the sway bars, without the cost and setup time of coilovers.
What about resale and reversibility?
Lowering springs are easy to reverse if you ever sell the car or want to return it to standard, because the factory dampers stay in place and the original springs can simply be refitted. Keep the factory springs in the garage for exactly this reason. Coilovers are also reversible, but you’ll need to keep and refit the complete factory strut assemblies. Many buyers in the Australian market prefer a modestly lowered car on quality springs over one with heavily adjusted coilovers, as it suggests a sensible build that’s been driven rather than tinkered with endlessly.
FAQs
Looking for more information about lowering springs and coilovers? Below we answer the most commonly asked questions
Are lowering springs or coilovers better?
Are coilovers legal in Australia?
Do lowering springs ride better than coilovers?
Can I use lowering springs with my standard shocks?
Are coilovers worth the extra money?
Do I need a wheel alignment with either option?
Choose the engineered, legal-friendly route with our lowering springs, or go the whole way with a matched kit.
