Suspension Arms for Vehicle

Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Whiteline KTA383 for the BMW F22 2-Series and F3X 3/4-Series is a set of 4 complete arms to solve any front end issues you may have. Due to the high performance of many BMW models, the original rubber tension strut arm bushings tend to take a beating and have a limited service life. In addition many owners will lower their BMW with a lowering kit or coilovers and may have a front end geometry issue that needs correcting.

For ease of fitment these new alloy tension arms also come complete with sealed ball joint ends and adjustable synthetic elastomer bushings. These facilitate +/- 0.5 deg caster adjustment for improved straight-line stability, enhanced steering feel, and stronger front-end grip on corner entry.

The F8X M car upgraded front control arms feature sealed inner bearings to provide superior precision, durability, and reduced deflection under load. They add a fixed 0.5 deg negative camber by pushing the bottom of the wheel outward and weight slightly less than the stock F22/F3X control arms. This is the perfect upgrade for track and autocross cars that demand more negative front camber.

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Whiteline offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

Complete replacement control arms featuring Whiteline Anti Lift Kit that are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.

Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.