Centre Bearing Alignment
IMPROVE GRIP, HANDLING & PERFORMANCE.
Centre bearing spacer kits and drop kits are designed to reposition the tailshaft centre bearing after a suspension lift changes driveline geometry. On vehicles with a two-piece tailshaft, changing ride height can alter the relationship between the gearbox, centre bearing and differential, potentially creating driveline angles that differ from t... Read more
Centre bearing spacer kits and drop kits are designed to reposition the tailshaft centre bearing after a suspension lift changes driveline geometry. On vehicles with a two-piece tailshaft, changing ride height can alter the relationship between the gearbox, centre bearing and differential, potentially creating driveline angles that differ from the original setup.
A centre bearing alignment kit adjusts the mounting position of the existing centre bearing to help correct this geometry. It is not a replacement centre bearing. The amount of correction required depends on the vehicle, tailshaft design and lift height, so fitment should be matched to the complete suspension setup.
What Is a Tailshaft Centre Bearing?
A tailshaft centre bearing supports the middle of a two-piece tailshaft. It is typically mounted beneath the vehicle and supports the shaft around the point where its front and rear sections meet.
The bearing itself is commonly supported within a flexible mounting assembly that helps locate the tailshaft while accommodating normal driveline movement and vibration.
Because the centre bearing establishes an important support point between the transmission and differential, its position influences the operating angles of the two tailshaft sections.
Not every vehicle uses a centre bearing. A one-piece tailshaft does not require the same central support arrangement.
Why Does a Lift Affect Centre Bearing Alignment?
A suspension lift can change the relative positions and operating angles of driveline components. On a vehicle with a two-piece tailshaft, this can alter the angles through which the shaft and its joints operate.
The amount of change depends on the vehicle and driveline design.
If those operating angles move outside the appropriate range, the driveline may develop vibration or shudder and place additional loads on components.
A lift does not automatically mean the centre bearing position is incorrect. The geometry needs to be assessed for the specific vehicle and lift setup.
Tailshaft Angles Explained
A tailshaft does not necessarily operate in a perfectly straight line. Its joints are designed to work through specific operating angles as power is transferred through the driveline.
With a two-piece shaft, several relationships matter:
- Gearbox or transfer-case output angle
- Front tailshaft section angle
- Centre bearing position
- Rear tailshaft section angle
- Differential pinion angle
Changing ride height can alter one or more of these relationships.
Correcting the centre bearing position aims to improve the geometry of the two-piece tailshaft rather than simply lowering the bearing by an arbitrary amount.
What Does a Centre Bearing Alignment Kit Do?
A centre bearing alignment kit changes the mounting position of the tailshaft centre bearing to compensate for driveline geometry changes associated with increased ride height.
Depending on the vehicle and required correction, repositioning can be achieved through different mounting arrangements. The principle remains the same: move the bearing to a position that produces a more appropriate relationship between the tailshaft sections and surrounding driveline components.
This is why the required correction should be matched to the vehicle and lift height.
Centre Bearing Spacers, Plates and Brackets
There are several ways a centre bearing can be repositioned.
A centre bearing spacer creates additional distance between the original bearing mount and its mounting surface. Other applications may require a plate or purpose-designed bracket to establish the required position.
The appropriate method depends on factors including:
- Vehicle design
- Centre bearing mounting arrangement
- Tailshaft configuration
- Suspension lift height
- Resulting driveline angles
These components should not be stacked or modified simply to achieve a greater drop. Use a correction method designed for the particular application and geometry.
Signs of Centre Bearing or Tailshaft Angle Problems
Incorrect tailshaft geometry or a worn centre bearing can contribute to driveline symptoms, but those symptoms are not specific enough to diagnose either problem on their own.
Possible signs worth investigating include:
- Driveline vibration
- Shudder when accelerating or taking off
- Clunking as driveline load changes
- Noise from around the centre bearing
- Visible deterioration of the centre bearing mount
- Symptoms appearing after a ride-height change
The speed, load and operating conditions under which a vibration occurs can provide useful diagnostic information.
Other Causes to Rule Out
Tailshaft vibration can also result from:
- Worn universal joints
- An unbalanced or damaged tailshaft
- Worn engine, gearbox or driveline mounts
- Incorrect differential or pinion angles
- Wheel or tyre imbalance
- Damaged driveline components
- A worn centre bearing itself
A centre bearing drop kit should not be used simply because a lifted vehicle has developed a vibration.
A qualified technician or driveline specialist should identify the cause and assess the relevant operating angles before parts are changed.
Does Every Lifted 4WD Need a Centre Bearing Drop Kit?
No. A centre bearing drop kit is not automatically required whenever a vehicle is lifted.
Whether correction is needed depends on the vehicle's driveline layout, tailshaft design, lift height and resulting operating angles. Two vehicles with similar suspension lifts may not necessarily require the same driveline correction.
If the vehicle has no driveline symptoms and its operating angles remain appropriate, adding unnecessary correction may not provide a benefit.
Where there is uncertainty, have the driveline geometry measured rather than choosing a drop amount based only on lift height.
Is a Centre Bearing Alignment Kit a Replacement Bearing?
No. A centre bearing alignment kit repositions the centre bearing mounting point. It does not repair a bearing that is already worn or damaged.
If the centre bearing itself is noisy, loose or damaged, the bearing or bearing assembly needs to be assessed separately.
Similarly, deteriorated rubber around a centre bearing cannot be repaired simply by changing its mounting height.
Inspect the condition of the existing bearing and support assembly before correcting its position so a worn component is not retained simply because the driveline geometry is also being changed.
What About Differential and Pinion Angles?
Centre bearing position is only one part of driveline geometry.
A suspension lift can also alter the relationship between the tailshaft and differential. Depending on the vehicle design, the pinion angle or the operating position of other driveline components may also need to be considered.
Front driveline geometry can present its own issues on some lifted 4WDs, particularly where the front differential position affects CV joint operating angles.
These corrections address different parts of the driveline. Repositioning a centre bearing should therefore not be treated as a universal solution for every vibration or driveline-angle issue caused by a lift.
The complete driveline setup should be considered when diagnosing a problem.
How Is a Centre Bearing Alignment Kit Fitted?
Installation generally involves supporting the relevant tailshaft section, releasing the centre bearing mounting and installing the alignment components to reposition the bearing.
The exact procedure depends on the vehicle and the design of the kit.
What the Job Involves
A typical installation can involve:
- Safely raising and supporting the vehicle
- Inspecting the tailshaft and centre bearing
- Supporting the tailshaft where required
- Removing the centre bearing mounting hardware
- Positioning the alignment components correctly
- Reinstalling the centre bearing at its corrected position
- Checking tailshaft and surrounding clearances
- Tightening fasteners to the specified torque
- Checking the driveline after installation
The centre bearing should remain correctly supported throughout the work. Avoid allowing the tailshaft to hang in a way that places unnecessary load on joints or other components.
Safety and Driveline Checks
Never work underneath a vehicle supported only by a jack. Use suitable stands or workshop lifting equipment on a stable surface.
Follow the vehicle and product installation procedures and use the specified torque values.
After installation, check that the tailshaft has appropriate clearance throughout its operating range and that no component can contact the chassis, brackets or surrounding parts.
If the source of a driveline vibration has not been confirmed, professional diagnosis is recommended before fitting a correction kit.
Choosing a Centre Bearing Alignment Kit
The correct centre bearing spacer kit or alignment solution depends on more than simply whether the vehicle has been lifted.
Consider:
- Vehicle application
- Tailshaft configuration
- Centre bearing mounting design
- Suspension lift height
- Current driveline angles
- Existing driveline modifications
- Condition of the centre bearing
- Other potential sources of vibration
Fitment should be confirmed for the specific vehicle and suspension setup. If you are unsure whether centre bearing correction is required, Whiteline can assist with fitment before you order.
Shop Centre Bearing Alignment Kits with Whiteline
Whiteline centre bearing alignment kits provide a targeted way to reposition the tailshaft centre bearing where suspension lift has altered driveline geometry. Correct selection starts with the vehicle, lift height and tailshaft configuration rather than treating every lifted 4WD the same.
Centre bearing alignment kits are part of our alignment parts range, and lifted 4x4s often pair them with diff drop kits to correct driveline angles front and rear.
Shop with the added confidence of Whiteline's Warranty and 60 Day Returns, with fitment assistance available when you need help choosing the right centre bearing correction for your setup.
4 items
- SKU: W93209 Benefit Note:
When lifting your vehicle, an inherent fault is driveline vibration. This spacer kit allows the tailshaft centre bearing alignment to be corrected depending on how much you have raised the vehicle. Essential to fit to a lifted vehicle to prolong the life of your centre bearing and to ensure smooth driveline operation.Rear Centre Bearing - Alignment Kit to Suit Ford Ranger PJ-PX and Mazda BT-50 UP, UR 2wd/4wd
Boosts handling and performance, while optimising suspension geometry; the perfect, complete upgrade. Includes: 6 Spacers, 2 Washers & 2 Tube NutsIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 6 Spacers, 2 Washers, 2 Tube Nuts$109.00 $76.30Fully installed for $406.30within 2 weeks - SKU: W93210 Benefit Note:When lifting your 4x4, an inherent fault is driveline vibration. This spacer kit allows the tailshaft centre bearing alignment to be corrected depending on how much you have raised the vehicle. Essential to fit to a lifted vehicle to prolong the life of your centre bearing and to ensure smooth driveline operation.
Rear Centre Bearing - Alignment Kit to Suit Toyota Hilux 2015-on 4wd
Balances comfort with performance while minimising noise and vibrations; the perfect, complete upgrade. Includes: 1 Plate, 2 Bolts & 4 WashersIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 1 Plate, 2 Bolts, 4 Washers$104.01 $72.81Fully installed for $402.81within 2 weeks - SKU: W93226 Benefit Note:When lifting your 4x4, an inherent fault is driveline vibration. This spacer kit allows the tailshaft centre bearing alignment to be corrected depending on how much you have raised the vehicle. Essential to fit to a lifted vehicle to prolong the life of your centre bearing and to ensure smooth driveline operation.
Rear Centre Bearing - Alignment Kit to Suit Ford Ranger PY and LDV T60 4wd
Maximises grip and stability for better control; the perfect, complete upgrade. Includes: 6 Spacers, 2 Bolts & 4 WashersIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 6 Spacers, 2 Bolts, 4 Washers$53.00 $37.10Fully installed for $367.10within 2 weeks - SKU: W93516 Benefit Note:When lifting your 4x4, an inherent fault is driveline vibration. This spacer kit allows the tailshaft centre bearing alignment to be corrected depending on how much you have raised the vehicle. Essential to fit to a lifted vehicle to prolong the life of your centre bearing and to ensure smooth driveline operation.
Rear Centre bearing - alignment kit to Suit Mitsubishi Triton MQ, MR
Creates a consistent drive no matter the surface; the perfect, complete upgrade. Includes: 2 Brackets, 2 Washers & 2 NutsIn StockShips within 24hrs.Ships within 24hrs.Qty Required 1Kit Contents 2 Brackets, 2 Washers, 2 Nuts$95.00 $66.50Fully installed for $396.50within 2 weeks
Your vehicle
Don’t know your rego?
Matching vehicles
No match — try selecting it below.
Got your rego handy?
Refine your search
Clear all- Performance Suspension Kits 30
- Lowering Springs 40
- Sway Bars & Sway Bar Kits 627
- Sway Bar Brackets 5
- Sway Bar Relocation Kits 5
- Sway Bar Service Kits 121
- Sway Bar Links 220
- Control Arms 173
- Lower Control Arms 123
- Individual Lower Control Arms 63
- Upper Control Arms 54
- Individual Upper Control Arms 7
- Strut Braces 41
- Suspension Bushes 1843
- Alignment Bushes 155
- Axle Bushes 18
- Coil Spring Spacers, Insulators & Seats 45
- Complete Bushing Kits 102
- Control Arm Bushes 687
- Cross Member Bushes 3
- Differential Bushes 68
- Greasable Shackles & Bushes 18
- Leaf Spring Bushes 192
- Panhard Rod Bushes 41
- Radius Arm Bushes 31
- Shifter Bushes 9
- Shock Absorber Bushes 67
- Strut Rod Bushes 42
- Subframe Bushes 31
- Sway Bar Bushes 423
- Toe Arm Bushes 2
- Traction Control Bushes 2
- Trailing Arm Bushes 130
- Tramp Rod Bushes 1
- Trunnion Bushes 1
- Watts Link Bushes 4
- Lowering Blocks 35
- 4x4 Lift Kits 6
- Diff Drop Kits 7
- Suspension Parts 3106
- Bump Stops 28
- Nuts, Bolts & Screws 2
- Panhard Rods 28
- Struts & Shock Absorbers 28
- Strut Mounts 28
- Suspension Arms 268
- Alignment Arms 24
- Camber Arms 6
- Caster Arms 12
- Toe Arms 9
- Control Arm & Radius Arm Kits 3
- Suspension Arm Service Kits 35
- Ball Joint Replacement Boots 5
- Ball Joint Replacement Kits 10
- Replacement Suspension Arm Bushes 19
- Vertical Stabilizer Links 1
- Suspension Springs 67
- Coil Springs 41
- Raised Springs 1
- Leaf Springs 25
- Fixed Pins 17
- Leaf Spring Shackles 12
- U Bolts 8
- Spring Saddles 1
- Alignment Parts 342
- Camber Bolts 25
- Centre Bearing Alignment 4
- Transmission Parts 13
- Gearbox Mount Bushes 13
- Chassis Parts 61
- Body Mount Bushes 7
- Chassis Bracing & Strengthening Kits 47
- Chassis Braces 6
- Strut Brace Parts 1
- Door Jamb Bushes 1
- Headlight Sensor Brackets 4
- Tailshaft Spacers 2
- Engine Parts 25
- Alternator Bushes 2
- Engine Mount Bushes 23
- Engine Mounts 1
- Steering Parts 101
- Drag Link Bushes 2
- Hicas Lock Kit 1
- Idler Arm Bushes 20
- Idler Arms 1
- Steering Damper Bushes 6
- Steering Knuckles 1
- Steering Rack & Pinion Bushes 59
- Steering Rack Coupling Bushes 7
- Tie Rods 4
- Trailing Arms 34
- Individual Trailing Arms 2
- Radius Arms 18
- Individual Radius Arms 10
- Brakes 9
- ABS Components 2
- Brake Line Kits 3
- Brake Valve Linkage 2
- Handbrake Parts 2
- Universal Parts 324
- Bushing Grease 3
- Polyurethane Rods 7
- Polyurethane Sheets 1
- Trade Packs 14
- Bulk Alignment Shims 4
- Bulk Leaf Spring Bushes 7
- Bulk Shock Absorber Bushes 1
- Bulk Sway Bar Link Bushes 2
- Universal Alignment Shims 10
- Universal Body Mount Bushes 1
- Universal Bump Stops 15
- Universal Camber Bolts 5
- Universal Coil Spring Spacers 33
- Universal High Lift Jack Handle Holders 1
- Universal Leaf Spring Bushes 7
- Universal Lowering Blocks 35
- Universal Pivot Bushes 1
- Universal Shock Absorber Bushes 2
- Universal Steering Coupling Bushes 7
- Universal Strut Brace Parts 1
- Universal Sway Bar Lateral Locks 10
- Universal Sway Bar Link Bushes & Washers 12
- Universal Sway Bar Links 149
- Adjustable Sway Bar Links 53
- Fixed Sway Bar Links 70
- Sway Bar Link Bushes 11
- Sway Bar Link Washers 1
- Threaded Rod Sway Bar Links 14
- Universal Sway Bar Mounts & Brackets 26
- Universal U Bolts 8
- Universal Valve Caps 1
- Merchandise 13
- Accessories 4
- Apparel 3
- Car Stickers 4
- Hats, Caps & Beanies 2
- Automotive Tools 3
- Bushing & Bearing Press Tool Kits 1
- Tyre Pressure Gauges 1
- Wheel Alignment Tools 1
- Car Accessories 4
- Bushing Grease 3
- Valve Caps 1
No categories match.
Can’t find what you’re looking for?
Our team can help you find the right part — or tell us what was missing so we can improve the site.
Call Us (02) 4340 2355 Give Feedback (opens in a new tab)